Brother dcp 145c Ubuntu (Zmodyfikowana instrukcja brother.com)

Pre-Required Procedures

Pre-required Procedure (2)

Related distributions

Ubuntu8.04 or greater

Related products/drivers

cupswrapper printer/PC-FAX drivers

Requirement

sudo apt-get install apparmor-utils

 1. "sudo aa-complain cupsd" command is required before the installation.

2. "sudo mkdir /usr/share/cups/model" command (as it is) is required before the installation.

---

Pre-required Procedure (3)

Related distributions

Debian, Ubuntu, openSUSE, Redhat

Related products/drivers

Printer drivers for DCP-1000, DCP-1400, DCP-8020, DCP-8025D, DCP-8040, DCP-8045D, DCP-8060, DCP-8065DN, FAX-2850, FAX-2900, FAX-3800, FAX-4100, FAX-4750e, FAX-5750e, HL-1030, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1430, HL-1440, HL-1450, HL-1470N, HL-1650, HL-1670N, HL-1850, HL-1870N, HL-5030, HL-5040, HL-5050, HL-5070N, HL-5130, HL-5140, HL-5150D, HL-5170DN, HL-5240, HL-5250DN, HL-5270DN, HL-5280DW, HL-6050, HL-6050D, MFC-4800, MFC-6800, MFC-8420, MFC-8440, MFC-8460N, MFC-8500, MFC-8660DN, MFC-8820D, MFC-8840D, MFC-8860DN, MFC-8870DW, MFC-9030, MFC-9070, MFC-9160, MFC-9180, MFC-9420CN, MFC-9660, MFC-9700, MFC-9760, MFC-9800, MFC-9860, MFC-9880

Requirement

Creating a symbolic link is required before the installation (superuser authorization is required to run the command)

For Debian based distributions earlier than Ubuntu8.10, Debian5:
"ln -s /etc/init.d/cupsys /etc/init.d/lpd"

For Redhat based distributions and Debian base distributions greater than Ubuntu8.10, Debian5:
"ln -s /etc/init.d/cups /etc/init.d/lpd"

---

Pre-required Procedure (4)

Related distributions

Debian, Ubuntu

Related products/drivers

printer/PC-FAX drivers

Requirement (superuser authorization is required to run the command)

"mkdir /var/spool/lpd" command is required if the folder does not exist.

---

Pre-required Procedure (5)

Related distributions

Debian 64 bit version, Ubuntu 64 bit version

Related products/drivers

printer/PC-FAX drivers

Requirement

ia32-libs or lib32stdc++ or lib32ncurses5

 is required to be installed.

---

Pre-required Procedure (6)

Related distributions

Distributions that do not have csh or tcsh by default

Related products/drivers

Printer drivers for DCP-110C, DCP-310CN, FAX-1815C, FAX-1820C, FAX-1835C, FAX-1840C, FAX-1920CN, FAX-1940CN, FAX-2440C, MFC-210C, MFC-3220C, MFC-3240C, MFC-3320CN, MFC-3340CN, MFC-3420C, MFC-3820CN, MFC-410CN, MFC-420CN, MFC-5440CN, MFC-5840CN, MFC-620CN

Requirement

csh or tcsh is required to be installed.

---

Pre-required Procedure (8)

Related distributions

Debian, Ubuntu

Related products/drivers

brscan, brscan2, brscan3

Requirement

sane-utils is required to be installed.

---

Pre-required Procedure (9)

Related distributions

Distributions using firewall

Related products/drivers

scan-key-tool

Requirement

The following ports are required to be open.

Inbound direction : UDP Port 54925

Outbound direction : TCP Port 54921

Example of the setting location;
OpenSUSE10.0: Yast-> Security and Users-> Firewall-> Allowed Service->Advanced
Fedora10: System-> Administration-> Firewall-> Other Ports

---

Pre-required Procedure (10)

Related distributions

Ubuntu8.04 or greater

Related products/drivers

P-touch/QL-Printer drivers

Requirement

2. "sudo mkdir /usr/share/cups/model" command is required before the installation.

Pre-required Procedure (12)

Related distributions

Distributions that does not have "psutils" by default

Related products/drivers

PT-9500PC driver

Requirement

"psutils" is required to be installed.

Instalujemy

sudo apt-get install sane sane-utils tcsh  lib32ncurses5 psutils xsane sane sane-utils

sudo mkdir /usr/share/cups/model

sudo mkdir mkdir /var/spool/lpd

sudo mkdir /usr/share/cups/model

sudo mkdir mkdir /var/spool/lpd

 zciągamy wszystkie stery włącznie z do jakiegoś katalogu

cd /scieżka/katalog

sudo dpkg-i *.deb

restart kompa

Teraz skaner

1. Install the scan driver.
2. Copy the following files under /usr/lib64/ to /usr/lib/.
   
   
   For brscan Users:
   /usr/lib64/libbrcolm.so.1.0.1
   /usr/lib64/libbrscandec.so.1.0.0
   /usr/lib64/sane/libsane-brother.so.1.0.7
   /usr/lib64/sane/libsane-brother.so
   /usr/lib64/sane/libsane-brother.so.1
   /usr/lib64/libbrscandec.so.1
   /usr/lib64/libbrcolm.so
   /usr/lib64/libbrcolm.so.1
   /usr/lib64/libbrscandec.so
   
   
   For brscan2 Users:
   /usr/lib64/libbrscandec2.so.1.0.0
   /usr/lib64/sane/libsane-brother2.so.1.0.7
   /usr/lib64/sane/libsane-brother2.so.1
   /usr/lib64/sane/libsane-brother2.so
   /usr/lib64/libbrcolm2.so.1.0.1
   /usr/lib64/libbrcolm2.so
   /usr/lib64/libbrscandec2.so.1
   /usr/lib64/libbrscandec2.so
   /usr/lib64/libbrcolm2.so.1
   
   
   For brscan3 Users:
   /usr/lib64/libbrscandec3.so.1.0.0
   /usr/lib64/sane/libsane-brother3.so.1.0.7
   /usr/lib64/sane/libsane-brother3.so.1
   /usr/lib64/sane/libsane-brother3.so
   /usr/lib64/libbrscandec3.so
   /usr/lib64/libbrscandec3.so.1
   
   
   For brscan4 Users:
   /usr/lib64/sane/libsane-brother4.so.1.0.7
   /usr/lib64/sane/libsane-brother4.so
   /usr/lib64/sane/libsane-brother4.so.1
   
   restart

upgrade do ubuntu 20.10 

sudo ln -sf /usr/lib64/sane/libsane-brother* /usr/lib/x86_64-linux-gnu/sane

nano /etc/sane.d/dll.conf.dpkg-old  tu znajduje się wpis brother3

 sudo nano /etc/sane.d/dll.conf tu go nie ma do pliku należy dopisać brother3